During consultation, we will meet and provide recommendations. We are to here to assist you every step of the way. At the end, you will receive an estimate and a site plan. Colors and textures can be chosen and a day is scheduled to complete the project.

The ground needs to be prepared for the installation. For new landscape borders, we make a deep cut with a sod cutter. For existing edges, the landscape material is pulled back to make room for the new border.

The concrete is mixed on site with a blend of cement, concrete sand, water, and fiber mesh.

The concrete is pushed through an extruding machine, compacted, and then pushed out through the desired mold. 

The border is finished with trowels. Now is the time when textures and patterns are added if desired.
 

To control the ground forces, control joints are cut in the border every 2-3 feet.

Be sure to not do any landscaping for at least 72 hours after installation. The borders will reach their full cure at about a month, care should be taken until then.